≡ Menu




OFB Group C Recruitment 2017 Online Application Form

OFB Group C Recruitment 2017 Online Application Form for total 4110 Group C vacancies advertisement has been publish today.

Sponsored Links
OFB Group C Recruitment 2017 Online Application Form

OFB Group C Recruitment 2017 Online Application Form

OFB Group C Recruitment 2017

OFB Recruitment 2017 Advertisement Notification Apply Online ofbindia.gov.in for the post of Group C this is the Latest Job & Careers opportunities in Ordnance Factory Board. Ordnance Factory Board has recently publish an advertisement notification for Group C Posts vacancies jobs opening for May 2017.



Ordnance Factory Board is a bicentenary Government organization with 41 factories spread throughout India with State of Art defence production technology in diverse fields and 22 others establishments for Training, Safety, R&D, Recruitment etc.

Ordnance Factory Recruitment Centre, on behalf of all the Ordnance Factories invites ONLINE applications from eligible citizens of India for filling up vacancies/posts of Semi-Skilled grade Industrial Employees (IEs) Group ‘C’ in different trades and Labour Group ‘C’ in various Ordnance Factories located across India.

Eligible and interested citizens of India, willing to contribute to National Defence Production and defence preparedness of the country are invited to apply ONLINE through the following OFB link: www.ofb.gov.in.

NOTE: Ex-Trade Apprentices of Ordnance Factories and candidates who have registered with employment exchange are also required to apply online through the OFB link given above. There is no exception available and all the applicants are required to apply ONLINE necessarily.

Manual application/Hard Copy of applications is not allowed and will not be entertained.

Vacancies in OFB Group C Recruitment 2017

Total vacancies in Ordnance Factory Board (OFB) Group C post details are given below.

                   Name Of the Post               Number of Vacancies
Industrial Employees (Semi-Skilled) & Labour Group ‘C’

4110

Vacancies Details

STATE: BIHAR
 

1. Ordnance Factory Project Nalanda (OFPN)

 

Trade UROBCSCSTTotalPHEx-SM
OHHHVH
Labour291380501105
OMHE (Operator Material Handling Equipment)62109000 

1

Rigger30000300
Total 381590621106
While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.
STATE: CHANDIGARH
 

2. Ordnance Cable Factory Chandigarh (OCFC)

 

Trade UROBCSCSTTotal

 

PHEx-SM
Boiler Attendant00101OHHHVH
000 

 

 

 

 

 

5

Carpenter20002000
Examiner (Engg) **01102000
Fitter Auto10001000
Fitter Electric01102000
Fitter Pipe01001000
Machinist198503202
Mason10001000
Miller100011
Millwright1000110
Painter20002000
Turner3000310
Welder1000110
Total 3111805065
(**) Qualification for Electrician as Examiner (Engg) Trade will be Matriculation + NAC/NTC in the Electrician, Wireman, Cable Jointer, Winder (Armature), Mechanic (HT, LT Equipments and Cable Jointing), Electrical Mechanic, Mechanic Electrical Maintenance (Industrial Automation), Mechanic (Repair and Maintenance of instruments used in Electrical Engineering)trades.

Note: Candidates who wish to apply for more than one trade [for e.g. Electrician and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility.

While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.

STATE: MAHARASHTRA
 

3. Ammunition Factory Khadki (AFK)

 

Trade UROBCSCSTTotalPHEx-SM
OHHHVH
CPW (Chemical Process Worker)334111000 

 

 

 

93

DBW (Danger Building Worker)75472215159000
Fitter Boiler51107000
Mason01001000
Electrician612110 

 

 

1

00
Labour17115134 

5

0
Machinist362482704
Fitter pipe32106
Grinder721010
Boiler Attendant210030
Total 1549344203111 #5 #4 #93
(#)- While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.
STATE: MAHARASHTRA
 

4. High Explosive Factory (HEF)

 

Trade UROBCSCSTTotalPHEx-SM
OHHHVH
Boiler Attendant110130000
CPW(Chemical Process Worker)241474490004
Welder100010000
Fitter Refrigeration200020000
Fitter Instruments200020000
Fitter Electronics200020000
Mason400040000
SMW (Sheet Metal Worker)210030000
Electrician11114000
Carpenter31004000
Painter41005 

1 #

00
Fitter General (Mech)300030
Machinist200020
Total 5119868414
(#)-1 PH vacancy reserved for the following trades as per physically disabled category suitable for the jobs -Electrician (OH), Carpenter (OH), Painter (OH/HH), Fitter General Mech (OH/HH/VH) and Machinist (OH/HH/VH). While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.
STATE: MAHARASHTRA
 

5. Ordnance Factory Ambajhari (OFAJ)

 

Trade UROBCSCSTTotalPHEx-SM
OHHHVH
Electrician14002162002
Examiner( Engg) **1200315201
Examiner Metal200020000
Examiner Metallography110020000
Fitter Auto Electric100010000
Fitter Electronics702090001
Fitter Instruments320050001
Fitter Pipe300030000
Fitter Refrigeration300030000
Grinder340180001
Machinist82000820008
Mason610070001
Miller4101611
Millwright2043229203
Painter400150001
Tool Maker010010000
Turner8700150001
Welder6112100001
Total 17922612219722
(**) Qualification for Machinist as Examiner (Engg) Trade/Post will be Matriculation + NAC/NTC in the Machinist trade only.

Note: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility.

While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.

STATE: MAHARASHTRA
 

6. Ordnance Factory Bhandara (OFBA)

 

Trade UROBCSCSTTotalPHEx-SM
OHHHVH
Fitter General (Mech)8101100005
Fitter Instruments412070001
Fitter Pipe010120000
Fitter Refrigeration101020001
Labour3817666702011
Machinist100010100
Turner100010000
OFBA Total 5320989003018
While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.
STATE: MAHARASHTRA
 

7. Ordnance Factory Bhusawal (OFBH)

 

Trade UROBCSCSTTotalPHEx-SM
OHHHVH
Carpenter200020
Electrician9501150 

 

 

7

 

 

 

18

Examiner (Engg) **110020
Fitter Electronic210030
Fitter (General Mech)17934330
Machinist3418105670
Mason110020
Millwright110020
SMW (Sheet Metal Worker)431080
Turner201030
Welder241802440
Total975715121810718
Qualification for Machinist as Examiner (Engg) Trade/Post will be Matriculation + NAC/NTC in the Machinist trade only.

Note: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility.

While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.

STATE: MAHARASHTRA
 

8. Ordnance Factory Chandrapur (OFCH)

 

Trade UR OBC SC ST Total PH Ex-SM
OHHH VH
DBW (Danger Building Worker)5119907900015
Electrician30003100
Examiner (Engg)**20002020
Examiner (Filling)20002000
Examiner (Proof & Test)20002000
Fitter Auto Electric01012000
Machinist10001000
Total 61 20 9 1 91 1 2 0 15
(**) The trade-wise/category-wise number of vacancies against the Examiner (Engg) are as follows:
UROBC SC ST Total OH HH VH Ex-SM Matriculation + NAC/NTC in
Fitter General (Mech) as Examiner(Engg)100010100Fitter
Machinist as Examiner(Engg)100010100Machinist
Note 1: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility.

Note 2: Candidates who wish to apply for more than one trade [for e.g. DBW and Examiner (Filling) both] should exercise their preference of trade while applying online, subject to eligibility.

While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.

STATE: MADHYA PRADESH
 

9. Gun Carriage Factory, Jabalpur (GCF)

 

Trade UR OBC SC ST Total PH Ex-SM
OHHH VH
Black Smith000110000
Electrician12321180004
Electroplater000110000
Examiner (Engg) **9443200202
Fitter Electronics000110000
Fitter General (Mech)261268522015
Machinist241065450015
Miller10334200003
Millwright6231120005
Turner15773320100
Welder5215130001
Total 107 43 32 33 215 2 3 2 25
(**) The trade-wise/category-wise number of vacancies against the Examiner (Engg) are as follows:
UROBC SC ST Total OHHH VH Ex-SM Matriculation + NAC/NTC in
Fitter General (Mech) as Examiner(Engg)111140001Fitter
Machinist as Examiner(Engg)111140100Machinist
Welder as Examiner(Engg)5221100101Welder (Gas & Electric), Welder (Gas & Arc), Gas Cutter, TIG/MIG Welder, Structural Welder, Welder (Pipe and Pressure Vessels), Advance Welder
Grinder as Examiner(Engg)200020000Machinist (Grinder)
Note: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility.

While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.

STATE: MADHYA PRADESH
 

10. Grey Iron Foundry, Jabalpur (GIF)

 

Trade UROBCSCSTTotalPHEx-SM
OHHHVH
Electrician7113120004
Examiner (Engg) **421290000
Examiner (Metal)411390001
Fitter Electric110240001
Fitter Electronics300140000
Fitter General (Mech)143883311112
Grinder000110000
Labour8813200105
Machinist133252301110
Mason100010000
Millwright702090001
Moulder9344200000
Painter200020000
Pattern Maker200020000
Turner6213120000
Welder6333150001
Total 8727243817613235
(**) The trade-wise/category-wise number of vacancies against the Examiner (Engg) are as follows:
UROBC SC ST Total OH HH VH Ex-SM Matriculation + NAC/NTC in
Machinist as Examiner(Engg)210140000Machinist
Fitter General (Mech) as Examiner(Engg)211150000Fitter
Note: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility.

While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.

STATE: MADHYA PRADESH
 

11. Ordnance Factory Itarsi (OFIT)

 

Trade UROBCSCSTTotalPHEx-SM
OHHHVH
Boiler Attendant000220010
Fitter Boiler401050030
Carpenter201030000
CPW (Chemical Process Worker)181043350005
Fitter Electric301150010
Total 271076500055
While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.
STATE: MADHYA PRADESH
 

12. Ordnance Factory Khamaria, Jabalpur (OFK)

 

Trade UROBCSCSTTotalPHEx-SM
OHHHVH
Labour4734133512905033
Total 4734133512905033
While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.
STATE: MADHYA PRADESH
 

13. Ordnance Factory Katni (OFKAT)

 

Trade UROBCSCSTTotalPHEx-SM
OHHHVH
Electrician40138000
Electroplater00011000 

 

2

Examiner (Metal)00033000
Fitter General (Mech)10001000
Machinist10012000
Melter (F/NF)41117000
Millwright00011000
Moulder10001000
Total 111210240002
STATE: MADHYA PRADESH
14. Vehicle Factory Jabalpur (VFJ)
Trade UROBCSCSTTotalPH Ex-SM
OH HH VH  
Mechanic Advanced Machine Tool Maintenance, mechanic mechatronics

 

Note: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility.

 

STATE: ORISSA
15. Ordnance Factory Bolangir (OFBOL)
Trade UROBCSCSTTotalPHEx-SM
OHHHVH
Boiler Attendant401160011
Carpenter410160001
DBW (Danger Building Worker)12628425625200018
Electrician21258360004
Electroplater200020101
Examiner (Engg) **2701214531405
Fitter Refrigeration9132150032
Fitter Auto511180121
Fitter Auto Electric200020011
Fitter Electric200020011
Fitter Electronics311050011
Fitter General (Mech)21178371143
Fitter Instruments100010000
Fitter Pipe400040001
Grinder200020001
Labour112342012
Machinist300030101
Mason300140000
Miller200020001
Painter200020000
Welder200130001
Total 2563775974652446
(**) The trade-wise/category-wise number of vacancies against the Examiner (Engg) are as follows:
UROBC SC ST Total OH HH VH Ex-SM Matriculation + NAC/NTC in
Machinist as Examiner(Engg)201031001Machinist
Fitter General (Mech) as Examiner(Engg)190910380404Fitter
Turner as Examiner (Engg)100120000Turner
Fitter Electronics as Examiner(Engg)100120000Electronics Mechanic, Mechanic Mechatronics, Mechanic Industrial Electronics, Mechanic (Embedded Systems and PLC), Mechanic Power Electronics (Inverters, UPS and Maintenance of Drives)
DBW as Examiner (Engg)402280000Attendant Operator Chemical Plant,Process Plant Operator
STATE: ORISSA
15. Ordnance Factory Bolangir (OFBOL)
Trade UROBCSCSTTotalPH Ex-SM
OH HH VH  
Note: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility. Candidates who wish to apply for DBW and Examiner (Engg)-DBW should exercise their preference of trade while applying online, subject to eligibility.

While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.

STATE: TAMIL NADU
16. Engine Factory Avadi (EFA)
Trade UROBCSCSTTotalPHEx-SM
OHHHVH
Electrician000110000
Fitter General (Mech)010010000
Heat Treatment Operator321060000
Machinist010010000
Total 341190000
STATE: TAMIL NADU
17. Heavy Alloy Penetrator Project (HAPP)
Trade UROBCSCSTTotalPHEx-SM
OHHHVH
Electroplater000110000
Electrician201030000
Fitter Electronics100010000
Total 3 0 1 1 5 0 0 0 0
STATE: TAMIL NADU
18. Heavy Vehicle Factory (HVF)
Trade UROBCSCSTTotalPHEx-SM
OHHHVH
Electrician8660201002
Examiner (Engg) **91470301103
Fitter AFV300030001
Fitter Electronics0670130001
Fitter General (Mech)181271381244
Heat Treatment Operator12730220002
Machinist2737222881449
OMHE (Operator Material Handling Equipment)301040440005
Painter200020000
Rigger25500300003
Welder011021000
Total 134 98 57 3 292 5 7 8 30
(**) The trade-wise/category-wise number of vacancies against the Examiner (Engg) are as follows:
UROBC SC ST Total OH HH VH Ex-SM Matriculation + NAC/NTC in
Fitter General (Mech) as Examiner(Engg)5840171102Fitter
Machinist as Examiner(Engg)131050000Machinist
Electrician as Examiner (Engg)231060001Electrician, Wireman, Cable Jointer, Winder (Armature), Mechanic (HT, LT Equipments and Cable Jointing), Electrical Mechanic, Mechanic Electrical Maintenance (Industrial Automation), Mechanic (Repair and Maintenance of instruments used in Electrical Engineering)
Welder as Examiner(Engg)101020000Welder (Gas & Electric), Welder (Gas & Arc), Gas Cutter, TIG/MIG Welder, Structural Welder, Welder (Pipe and Pressure Vessels), Advance Welder
Note: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility.

While applying online, PH Candidates should ensure their eligibility for the trades by going through

STATE: TAMIL NADU
18. Heavy Vehicle Factory (HVF)
TradeUROBCSCSTTotalPHEx-SM
Annexure-‘D’.

 

STATE: TELANGANA
19. Ordnance Factory Medak (OFMK)
TradeUROBCSCSTTotalPHEx-SM
OHHHVH
Electrician521194#13
Examiner (Engg) **741012
Fitter Auto22015
Grinder41117
Machinist 6 2 10 9
Miller423110
Millwright30003
Turner1154222
Welder13 63123
Fitter Electric200130 0 0
Fitter General (Mech)1684230000
Total73321810 133413
(**) The trade-wise/category-wise number of vacancies against the Examiner (Engg) are as follows:
UROBCSCSTTotalOHHHVHExSMMatriculation + NAC/NTC in
Fitter General (Mech) as Examiner(Engg)211040000Fitter
Machinist as Examiner(Engg)110020 000Machinist
Turner as Examiner (Engg)210030000Turner
Welder as Examiner(Engg)21 0 0 30000Welder (Gas & Electric), Welder (Gas & Arc), Gas Cutter, TIG/MIG Welder, Structural Welder, Welder (Pipe and Pressure Vessels), Advance Welder
Note: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility
(#)- 4-OH/HH/VH vacancies reserved for the aforementioned trades as per physically disabled category suitable for the jobs. While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.
STATE: UTTARAKHAND
20. Ordnance Factory Dehradun (OFDUN)
TradeUROBCSCSTTotalPHEx-SM
OHHHVH
Optical Worker183512701#1#22
Turner3010 40
Fitter instruments31 48144 0
Fitter General (Mech)3010 4 0
Machinist1526023 0
Electroplater100010
Painter401050
Moulder100010
Carpenter001010
Electrician21 1040
Grinder300 0 3 0
Mason200020
Millwright2010 3 0
Labour6640160001
Total9116292138 01123
(#)- 1-HH and 1-VH vacancies reserved for the aforementioned trades as per physically disabled category suitable for the jobs. While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.
STATE: UTTARAKHAND
21. Opto Electronics Factory, Raipur Dehradun (OLF)
TradeUROBCSCSTTotalPHEx-SM
OHHHVH
Electrician200020000
Examiner (Engg) **163 5125 0003
Examiner (Optical)1111013 0001
Fitter Electronics29312351106
Fitter Instruments1855028 0 1 0 3
Machinist2102225 002 2
Millwright200020000
Optical worker1036120 0000
Turner811 0 10 100 1
Total11716216160 22216
(**) The trade-wise/category-wise number of vacancies against the Examiner (Engg) are as follows:
UROBCSCSTTotalOHHHVHExSMMatriculation + NAC/NTC in
Machinist as

Examiner(Engg)

30 1 0 400 03Machinist
Turner as

Examiner(Engg)

20002 0 00Turner
Fitter General (Mech) as Examiner(Engg)20103000Fitter
Fitter Instruments as Examiner(Engg)3 010 4000Instrument Mechanic, Advance Mechanic (Instruments)
Fitter Electronicsas Examiner(Engg6 32112 00 0Electronics Mechanic, Mechanic Mechatronics, Mechanic Industrial Electronics, Mechanic (Embedded Systems and PLC), Mechanic Power Electronics (Inverters, UPS and Maintenance of Drives)
Note: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility.
STATE: UTTAR PRADESH
22. Field Gun Factory Kanpur (FGK)
TradeUROBCSCSTTotalPHEx-SM
OHHHVH
Boiler Attendant110025 #18
Electrician643013
Examiner (Metal)31105
Examiner (Engg) **532010
Fitter General (Mech)743014
Machinist843015
Millwright41106
Turner532010
Welder31004
Black Smith732012
Fitter Refrigeration21003 

 

 

 

 

 

0

Fitter Auto20002
Fitter Electric52108 

 

 

0

Fitter Electronics211 0 4
Grinder10001
Melter (F/NF)241310047
OMHE (Operator Material Handling Equipment)933015
Rigger52108
Total994733 0 179518
STATE: UTTAR PRADESH
23. Ordnance Factory Kanpur (OFC)
TradeUROBCSCSTTotalPHEx-SM
OHHHVH
CPW (Chemical Process Worker)53201000049
Fitter Auto10001000
Fitter Electric01001000
Fitter Electronics01001000
OMHE (Operator Material Handling Equipment)622010000
Heat Treatment Operator622010000
Welder10001000
Electrician261312152100
Examiner (Engg) **26141005040
Millwright33151116010
Painter53201020
Turner1912313530
Fitter General (Mech)16750282
Machinist115605322304
Total25913310254991749
(**) The trade-wise/category-wise number of vacancies against the Examiner (Engg) are as follows:
UROBCSCSTTotalOH/HHVHExSMMatriculation + NAC/NTC in
Machinist as Examiner(Engg)115402040Machinist
Fitter General (Mech) as Examiner(Engg)5320100Fitter
Turner as Examiner(Engg)53201005Turner
Millwright as Examiner(Engg)5320100Millwright Maintenance Mechanic, Mechanic Machine Tool Maintenance, Mechanic Advanced Machine Tool Maintenance, mechanic mechatronics
Note: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility.
STATE: UTTAR PRADESH
24. Ordnance Factory Muradnagar (OFM)
TradeUROBCSCSTTotalPHEx-SM
2- OH1- HH2- VH
Electrician843015Total PH = 5 #20
Fitter General (Mech)23139045
Machinist1687031
Mason421070
Pattern Maker101020
Moulder17870320
Fitter Electronics201030
Examiner (Engg) **532010
Millwright10102
Painter11002Total PH = 5 #
Turner32106
Welder53109
Heat Treatment Operator21104000
Melter (F/NF)1275024000
OMHE (Operator Material Handling Equipment)42107000
Total1025338019321220
(**) Qualification for Machinist as Examiner (Engg) Trade will be Matriculation + NAC/NTC in the Machinist trade only. Note: Candidates who wish to apply for more than one trade [for e.g. Machinist and Examiner (Engg) both] should exercise their preference of trade while applying online, subject to eligibility. (#)- 5 PH vacancies reserved for the aforementioned trades as per physically disabled category suitable for the jobs. While applying online, PH Candidates should ensure their eligibility for the trades by going through Annexure-‘D’.
STATE: WEST BENGAL
25. Metal and Steel Factory, Kolkata (MSF)
TradeUROBCSCSTTotalPHEx-SM
OHHHVH
Black Smith18882361115
Electrician11560225
Electroplater400040
Fitter Instruments300031
Machinist248100426
Millwright9521179
Welder100010
Total702626312511126

OFB Group C Recruitment 2017 Eligibility

Minimum educational qualification for OFB Recruitment 2017 for the Group C posts is given below.

NOTE: CANDIDATES TO ENSURE THEIR ELIGIBILITY FOR THE EXAMINATION.

The Candidates applying for the aforementioned vacancies should ensure that they fulfil all eligibility conditions for the post/trade applied for. Their admission to all the stages of the selection procedure will be purely provisional subject to satisfying the prescribed eligibility conditions. Mere issue of admit card to the candidate for the written examination will not imply that his/her candidature has been finally accepted by OFRC/OFB. Verification of eligibility conditions with reference to original documents will be done only at the time of trade test in the respective factories.

EDUCATIONAL QUALIFICATIONS:

NAME OF TRADE/POSTQUALIFICATIONS
Semi Skilled WorkmanMatriculation + National Trade Certificate (NTC)/National Apprentice Certificate (NAC) issued by National Council of Vocational Training (NCVT).
LabourMatriculation
For Ex-ServicemenTechnicians with upgrading qualifications of Class – III equivalent to NAC. (With due endorsement of the equivalence of Civil Qualification on their certificate) OR Technicians with upgrading qualifications of Class – II & Class I equivalent to NTC. (With due endorsement of the equivalence of Civil Qualification on their certificate)
  • NOTE 1: Degree/Diploma holders in engineering without possessing NAC/NTC shall not be accepted as qualification for direct Recruitment for the posts of semi-Skilled Industrial Employees against this advertisement.
  • NOTE 2: Trade-wise relevant NAC/NTC certificates required for Direct recruitment of Industrial employees are enclosed at Annexure-‘B‘.
  • NOTE 3: While applying online, PH Candidates should ensure their eligibility for the trades by going through “Annexure-‘D’- Posts identified suitable for Physically Disabled Category along with the Physical Requirements and Functional Classifications.

CENTRES OF EXAMINATION: Centre will be allotted with respect to location of the Ordnance Factory applied by the candidate in one of the 12 centres viz. Bhubaneswar, Chennai, Coimbatore, Delhi, Hyderabad, Jabalpur, Kolkata, Kanpur, Mumbai, Nagpur, Pune and Trichy. Additional centres like Bhopal, Lucknow and Dehradun may be included. Candidates may be allotted any other centre other than the one determined at the time of submission of online application for administrative reasons. No request for change of centre shall be entertained under any circumstances at any stage of the examination.

MEDIUM OF EXAMINATION: The examination will be trilingual, i.e., Hindi, English and regional language of the State where the factory against which the candidate has applied is located. With reference to Ordnance Factories and their respective locations, this translates to English, Hindi & any one regional language among the following- Bengali/ Marathi/Oriya/Tamil/Telugu. It may be noted that candidates can appear only for that regional language of the state where the factory concerned is located and will have to appear for examination in that State/Centre only.

Age Limit

AGE LIMIT: 18 to 32 year (Minimum Age 18 year for all categories) as on the closing date of online applications. Permissible relaxation of upper age limit for different categories is as given:

S. NOCATEGORYAGE RELAXATION AFTER UPPER AGE LIMIT
1.OBC (Non Creamy Layer)3 years
2.SC/ST5 years
3.Ex-Trade Apprentice of Ordnance FactoriesURup to the Period of Apprentice Training undergone By The Candidate Under Apprenticeship Act 1961
OBC (NCL)3 years + upto the Period of Apprentice Training undergone by The Candidate Under Apprenticeship Act 1961
SC/ST5 years + up to the Period of Apprentice Training Undergone by The Candidate Under Apprenticeship Act 1961
4.Ex-ServicemenUR03 years in addition to the period of service rendered in the defence services as on the closing date.
OBC (NCL)06 years (3 years + 3 years) in addition to the period of service rendered in the defence services as on the closing date.
SC/ST08 years (3 years + 5 years) in addition to the period of service rendered in the defence services as on the closing date.
5.Disabled Defence Services PersonnelURUp to the age of 45 years
OBC (NCL)Up to the age 48 years
SC/STUp to the age 50 years
6.Persons with disabilityUR10 years
OBC (NCL)13 years
SC/ST15 years
7.Candidates Domiciled In J&K ONLY From 01-01-1980 TO 31- 12-1989UR5 years
OBC (NCL)8 years
SC/ST10 years
8.Upper Age limit for Central Govt. Civilian Employees (General/ Unreserved) who have rendered not less than 3 years regular and continuous service as on Closing date.URUp to the age 40 years
OBC (NCL)Up to the age 43 years
SC/STUp to the age 45 years
9.Retrenched Central Government EmployeeUR3 years + up to the Period of previous service under the Govt. of India
OBC (NCL)06 years (3 year + 3 year) + up to the Period of previous service under the Govt. of India
SC/ST08 years (3 years + 5 years) + up to the Period of previous service under the Govt. of India
10.Whole time Cadet Instructors in NCC
a) Who are released from NCC after expiry of their initial/extended tenureUR3 years + Period of service rendered in NCC
OBC (NCL)06 years (3 years + 3 years) + Period of service rendered in NCC
SC/ST08 years (3 years + 5 years) + Period of service rendered in NCC
b) Who are released from NCC before the expiry of their initial/extended tenureUR3 years + Period of service rendered in NCC provided they have served in NCC for a period of not less than six months prior to their release from NCC
OBC (NCL)06 years (3 years + 3 years) + Period of service rendered in NCC provided they have served in NCC for a period of not less than six months prior to their release from NCC
SC/ST08 years (3 years + 5 years) + Period of service rendered in NCC provided they have served in NCC for a period of not less than six months prior to their release from NCC
11.Ex-General Reserve Engineer Force Personnel (GREF)UR3 years + Period of Service in GREF
OBC (NCL)06 years (3 years + 3 years) + Period of Service in GREF
SC/ST08 years (3 years + 5 years) + Period of Service in GREF
12.Territorial Army Personnel who have service on the permanent staff of Territorial Army unit or have been embodied for service under T.A. Rule 33 for a continuous period of not less than six monthUR3 years + Entire period of embodied service including broken period in the Territorial Army
OBC (NCL)06 years (3 years + 3 years) + Entire period of embodied service including broken period in the Territorial Army
SC/ST08 years (3 years + 5 years) + Entire period of embodied service including broken period in the Territorial Army
13.Widows, Divorced woman and woman judicially separated from their husbands and who are not re-marriedURUp to the age of 35, but no relaxation of educational qualification or method of recruitment
OBC (NCL)Up to the age of 38, but no relaxation of educational qualification or method of recruitment
SC/STUpto the age of 40, but no relaxation of educational qualification or method of recruitment
14.Meritorious SportspersonsUR5 years
OBC (NCL)8 years
SC/ST10 years
  • NOTE 1: The crucial date for determining the eligibility criteria will be the closing date of ONLINE application. In so far as cases of Ex-Serviceman are concerned, deduction of the military service rendered from the age of Ex-Servicemen is permissible against the reserved or unreserved posts and such exemption cannot be termed as relaxed standards in regard to age.
  • NOTE 2: Ex-Servicemen and Physically Handicapped candidates may apply against posts even if the posts are not reserved/ear-marked for them. However, only age relaxation and fee exemption will be granted and they will be considered without horizontal reservations, subject to the post being identified for PH.
  • NOTE 3: Candidates belonging to the Scheduled Castes, the Scheduled Tribes and the Other Backward Classes who are also covered under any other clauses above, viz. those coming under the category of Ex-servicemen, persons domiciled in the State of J & K, blind, Hearing Impaired and orthopedically handicapped etc. will be eligible for grant of cumulative age relaxation under the respective categories.
  • NOTE 4: Meritorious sportsperson in categories of sports specified as per extant rules (O.M. No. 15012/3/84-Estt (D) dated 12.11.1987), will be eligible for age relaxation in upper age limit up to a maximum of 5 years (10 years in case of those belonging to Schedule Castes/Schedule Tribes and 8 years in case of those belonging to Other Backward Classes). This concession will be available only to those sportspersons who satisfy all other eligibility conditions relating to educational qualifications etc. and furnish a certificate in the form and from an authority as prescribed.

OFB Group C Recruitment 2017 Pay Scale | Salary

                   Name Of the Post               Pay Scale | Salary
Industrial Employees (Semi-Skilled) & Labour Group ‘C’

Pay Band-1 (Rs.5200-20200), Grade Pay Rs. 1800 (pre-revised), Entry Level Pay in 7th CPC 18000

Other Allowances:- Allowances as admissible to the Central Government employees from time to time.

OFB Group C Recruitment 2017 Advertisement

OFB Group C Recruitment 2017 Selection Process

a) Selection process shall comprise of a 2 stage process:

  •  Written examination of 100 marks, objective type and OMR based
  •  Trade Test (Practical) at respective factory along with document verification

b) On the basis of merit list based on marks obtained in written test, candidates 1.25 times the number of vacancies shall be called for Trade Test (Practical).

c) The Trade Test (Practical) shall be only qualifying in nature, without any marks. However, those candidates who do not qualify in the Trade Test shall not be considered at all, irrespective of marks obtained in the written examination.

d) The credentials (as submitted in the application) of the candidates called for the trade test (Practical) will be verified with the original documents at the time of Trade Test at the respective factory.

e) The final merit/select list shall be based on marks obtained in the written test only, subject to document verification and qualifying the Trade Test.

f) The final merit/select list thus prepared factory wise will be published at www.ofb.gov.in.

NOTE:

i) Preference to Ex-Trade Apprentices of Ordnance Factories: As per current executive order of MOD/OFB, extra 5 marks “which is under litigation as on date” may be given to Ex-trade Apprentices of Ordnance Factories, in the final merit list of the written examination to be conducted for a total of 100 marks for recruitment of Industrial Employees in Ordnance Factories against this advertisement. This provision is sub-judice and subject to outcome of court cases/orders.

ii) Resolution of Tie (in order of preference):

Semi-Skilled Tradesman:

  • a) The candidates scoring higher marks in Part – “B” of the written examination (as per Annexure C) will get preference.
  • b) Ex-Trade Apprentice of the concerned Ordnance Factory will get preference in the factory-wise merit list.
  • c) If both candidates are Ex-Trade Apprentices from the same ordnance factory, then batch seniority/Marks will be taken into consideration as given: In between the trained ex-trade Apprentices of the recruiting Ordnance Factory, preference shall be given to those who are senior i.e. if two or more ex-trade apprentices secure the same marks then preference shall be given on the basis of seniority. Seniority of ex-trade apprentices of the recruiting Ordnance Factory shall be decided as given: “The NCTVT examination batch number (month/year) will be criteria for maintain the seniority of Ex-TA. The merit list of the particular NCTVT examination will be the criteria of seniority for Ex-TA for that batch”
  • d) Ex-trade Apprentices of sister Ordnance Factory will get preference thereon, with seniority conditions as given above.
  • e) The candidate older in age will get preference.
  • f) Alphabetical order of names.

Labour:

  • a) The candidate older in age will get preference.
  • b) Alphabetical order of names.

OFB Group C Exam Pattern | Syllabus 2017

SCHEME & SYLLABUS OF EXAMINATION

SCHEME:

1. There will be a written examination of one paper. The paper will be of “Objective-Multiple-choicetype” of maximum 100 marks.

2. The paper will consist of two parts: a. PART -A will consist of 20 marks having questions on General Science and Quantitative Aptitude, each having weightage of 10 marks. The question will be of up to 10th Standard. b. PART – B will consist of 80 marks of NCVT syllabus for the relevant trade.

3. All the Questions will be compulsory. There will be no negative marking for wrong answer.

4. The subject of the written examination, the maximum marks allotted to each paper, no of questions andthe time allowed is given in the table below:-

SubjectNo. of QuestionsMaximum MarksTime allowedTotal Duration/ Timing for candidates utilizing the facilities of a scribe
Part A (Objective Type)1.General Science (10 Questions)

2. Quantitative Aptitude (10 Questions)

10 Marks

 

10 Marks

2 hrs2 Hours 40 minute
Part B (Objective Type) Questions from the NCVT Syllabus of relevant trade80 Questions80 Marks
Total100 Questions100 Marks

Note: 1. The paper would be required to be answered in OMR sheets. 2. Candidates would be required to darken the circles in the OMR sheet with black pen. OMR sheets marked in pencil would be rejected outright. 3. No marks would be allotted for questions in which multiple darkening has been done in the OMR Sheet.

SYLLABUS:

A. General Science (10 Questions) Question will be aimed at testing the candidate’s General Awareness of the environment around him. Question will also be designed to test knowledge of basic science studied upto 10th standard and would include such matters of every day observations and experience as may be expected of any educated person.

B. Quantitative Aptitude (10 Questions) The candidate will be tested for general mathematics of upto 10th Standard involving number systems, equations in two variables, simple and compound interest, perimeter, area and volume of geometrical figures, Direct and inverse proportions, Pythagoras theorem and trigonometry.

C. NCVT Trade (80 Questions): Questions from the NCVT Syllabus of relevant trade.

D. Trade Test: The syllabus for trade test (Practical) will be as per trade test specification of semiskilled grade of the relevant trade, trade test will be merely qualifying nature. It will not decide the merit of the selected candidates. The merit will be decided solely based of the results of written examination.

E. There shall be no interview for filling up of these vacancies.

LABOUR POSTS

SCHEME (XTH STANDARD LEVEL)

SUBJECTMAXIMUM MARKSNUMBER OF QUESTIONSDURATION
Numerical Aptitude (Objective Type)40402Hours
General Science (Objective Type)3030
General Awareness (Objective Type)3030
Total Marks100100

SYLLABUS FOR WRITTEN TEST

GENERAL SCIENCE

The questions on science may be set keeping in view the standard appropriate to High School. Questions may include subjects and activities which are more relevant to day-to-day existence/activities of human life.

GENERAL AWARENESS

TRADETEST

As per trade test specifications, an unskilled workman will be mainly engaged on handling/shifting of material. He will also be required to clean machines, floors of shop/areas around machines and other similar places, if and as necessary. The trade test may be designed accordingly to test the aptitude of the candidate. However, this test will be of qualifying nature only

  • Final grading will be decided based only on marks obtained in written test subject to qualifying in the prescribed trade test.
  • There shall be no interview for filling up of these vacancies.

OFB Group C Recruitment 2017 Important Dates

Start Date of submission of on-line application :29.05.2017
Last Date of submission of on-line application :19.06.2017

OFB Group C Recruitment 2017 Online Application Form

The candidates are advised to examine all the options available and take an informed decision.

  • Candidate can apply to one factory only, as per his/her choice. Merit list will be prepared factory wise and select list will be made as per reservation roster applicable to the location of the factory concerned. Candidate will be eligible to get the benefit of community/caste reservation only in case the particular caste to which the candidate belongs to is included in the list of reserved communities recognized by the State Government of the State in which the factory is located.
  • Candidates can apply for ONLY one trade: The candidates are advised to examine all the options available and take an informed decision. The candidate can apply to only one trade of one factory, subject to eligibility as per Annexure B. However, in certain trade/post such as Examiner (Engg), if a candidate wishes to apply for more than one trade (wherever applicable and eligible as mentioned in Annexure B as “Single Application”), she/he must give their choice of trade in the order of preference among the options, while filling the online application. In such cases, candidates will be empanelled based on merit-cum-choice subject to suitability. Post allotted to a candidate at first opportunity of empanelment in such a situation shall not be reviewed/revised/re-allotted under any circumstances.
  • Candidates are required to apply online through the website http://www.ofb.gov.in. Detailed instructions for filling up online applications are available on the above mentioned website.

SALIENT FEATURES OF THE SYSTEM OF THE ONLINE APPLICATION FORM ARE GIVEN HEREUNDER:

a) Detailed instructions for filling up online applications are available through a link in the above mentioned website under the tab ‘Apply Online’ & ‘How to Apply’.

b) The Online applications (Part I and II) can be filled from 29.05.2017 to till 23:55 Hrs on 19.06.2017.

c) The candidate must ensure that before filling up of the Online Application, she/he must have the following ready:

  • Scanned photograph in 8-bit jpg/jpeg format of size 30 KB to 50 KB with resolution 140 pixel width and 60 pixel height and approx physical size 3.5 X4.5 cm. (Please note that applications with unclear photo, photo with cap, wearing goggles, disfigured or unidentifiable photo will be cancelled)
  • Scanned signature in 8-bit jpg/jpeg format of size 10-20 KB, 100 pixel width and 120 pixel height and approx. size 3.5 X 1.5 cm (Please note that applications with unclear/illegible signature will be cancelled)
  • Scanned left thumb impression in 8-bit jpg/jpeg format of size 10-20 KB, 100 pixel width and 120 pixel height and approx. size 3.5 X 1.5 cm (Please note that applications with unclear or smudged LTI will be cancelled)
  • Requisite certificates for SC/ST/Physically Handicapped/OBC-Non Creamy Layer/Ex Trade Apprentices/Ex Servicemen, as applicable, in 8-bit jpg/jpeg format size 30 KB to 50 KB with resolution 140 pixel width and 60 pixel height.
  • Details of Roll Number, Name of Board, Percentage, Year of passing of Xth Standard to be entered, as and when asked for.
  • Details of Trade, Roll Number, Institute, Semester details, Month and Year of Passing, Total marks obtained etc of NTC/NAC to be entered, as and when asked for.
  • Valid Photo ID Card with Number- Acceptable Photo IDs are Passport, Voter photo identity card, Driving Licence issued by RTO, PAN Card , Photo Identity card having serial number issued by Central / State Government, Unique Identification Card “Aadhaar”, Photo identity cards having serial number issued by public sector Undertakings of State/Central Government, District Administrations, Municipal bodies and Panchayat Administrations.
  • In case candidate requires a scribe, scribe details such as Name, Mobile Number, Email ID, Address, Qualification to be entered and Scanned Photo of scribe to be uploaded in 8- bit jpg/jpeg format size 30 KB to 50 KB with resolution 140 pixel width and 60 pixel height.
  • For Ex Servicemen-Discharge details to be entered and Scanned Discharge Certificate to be uploaded in 8- bit jpg/jpeg format size 30 KB to 50 KB with resolution 140 pixel width and 60 pixel height, as and when asked for.
  • For Ex Trade Apprentices- Details of apprenticeship training done Ordnance Factories with relevant certificate to be uploaded in 8- bit jpg/jpeg format size 30 KB to 50 KB with resolution 140 pixel width and 60 pixel height, as and when asked for.
  • Details of credit card, debit card, net banking etc to be provided for fee payment, as and when asked for

d) Candidates will be required to complete the Online Application Form containing two stages viz. Part-I and Part-II, as per the instructions available through drop down menus. Candidates have to completely fill up the information in both the stages to be considered eligible for appearing in the written examination.

e) On completing Part I, the candidates will receive an Application Registration Number (ARN) on the same mobile number which they entered. Input of erroneous or incorrect mobile number in Part I will lead to incomplete registration.

f) On successful completion of Part I and receipt of Application Registration Number through SMS, the candidate should login through ‘APPLICANT LOGIN’ in the website and complete all the information/formalities of PART-II, including fee payment, as per the dropdown menus and guidelines.

g) The candidates are required to pay a fee of Rs.50/- Rupees Fifty only) [excepting SC/ST/ Female/Physically Handicapped candidates who are exempted from payment of fee] either by payment gateway integrated in the website by using credit card, debit card or net banking or by depositing the money in any branch of SBI by cash (through challan downloaded from this website).

CHALLAN MODE: Candidates may pay by cash in any branch of SBI through the SBI challan which can be generated and downloaded from the website. Applicants who pay by cash (Challan Mode) should take a printout of the system generated challan slip during PART-II of the registration and deposit the fee at an SBI branch counter before the closing date of application. After the candidate remits the cash at SBI branch, she/he has to enter the transaction reference number by logging into ‘APPLICANT LOGIN’ and upload the stamped challan displaying the transaction number. Please note that the option to upload the challan details will be available only 2 hours after downloading of the challan. Only after this process is completed, registration process of such candidates who opt to pay by Challan Mode will be considered successfully completed.

h) Applicants who are unable to pay the amount on the closing date even with valid Challan Slip will have the option for online payment mode also, which will be open until 23:55 hours of 19th June 2017.

i) The candidates must ensure that while filling their Application Form, they are providing their valid and active E-Mail IDs as OFRC may use electronic mode of communication while contacting them at different stages of examination process.

j) The candidate shall print and retain the application forms with themselves only to be produced by her/him later, at the time of document verification/trade test. Candidates are NOT required to send hard copy of application forms to the respective Factory/OFRC/OFB.

k) Candidates are strongly advised to apply online well in time without waiting for the last date for submission of Online Applications.

Any duplicate applications with different trades/factories will be summarily rejected. The applicants are advised to submit only single application. However, if due to any unavoidable situation, if she/he submits another/multiple applications, then she/he must ensure that application with the higher Application Registration Number/last application is complete in all respects like applicants’ details, examination centre, photograph, signature, fee etc. The applicants who are submitting multiple applications should note that only the applications with higher Application Registration Number/last application shall be entertained by OFRC and fee paid against one registration shall not be adjusted against any other registration nor refunded under any circumstances.

DOCUMENTS / CERTIFICATES REQUIRED

DOCUMENTS / CERTIFICATES REQUIRED AT THE TIME OF TRADE TEST/DOCUMENT VERIFICATION:

The following original documents are required ONLY at the time of document verification/trade Test.

  • a) Matriculation / 10th standard certificate
  • b) NTC/NAC certificate /equivalent Army certificate
  • c) NOC & Service Certificate for Departmental Candidates seeking age relaxation-A candidate claiming to belong to the category of Central Government servant must have served minimum three years of continuous service and thus seeking age relaxation would be required to produce a Certificate (NOC) issued after the date of advertisement from his/her employer that she/he is a regularly appointed Central Government Servant and not on casual/adhoc/daily wages/hourly paid/contract basis employee.
  • d) Community Certificate by the candidate seeking reservation as SC/ST/OBC in the PRESCRIBED PROFORMA from the competent authority indicating clearly the candidate’s caste, the Act/Order under which the caste is recognized as SC/ST/OBC and the village/town the candidate is ordinarily a resident of. OBC candidates seeking reservation should submit certificate issued by the competent authority in specified format certifying that they do not belong to creamy layer.
  • e) Physically Handicapped certificate in prescribed Performa issued by the Competent Authority for physically handicapped persons eligible for appointment to the posts on the basis of prescribed standards of Medical Fitness. The Competent Authority to issue Physically Handicapped Certificate shall be Medical Board duly constituted by the Central or State Government.
  • f) Discharge Certificate issued by the competent authorities for candidates claiming ExServiceman category.
  • g) If the certificate is not either in Hindi/English, then a duly translated copy in Hindi/English has to be produced at the time of document verification.
  • h) Decision with regard to Document Verification will rest with concerned Ordnance Factories and shall be deemed final.

DOCUMENTS / CERTIFICATES TO BE UPLOADED AT THE TIME OF ONLINE APPLICATION STAGE

  • a) Community Certificate by the candidate seeking reservation as SC/ST/OBC in the PRESCRIBED PROFORMA from the competent authority indicating clearly the candidate’s caste, the Act/Order under which the caste is recognized as SC/ST/OBC and the village/town the candidate is ordinarily a resident of. OBC candidates seeking reservation should submit certificate issued by the competent authority in specified format certifying that they do not belong to creamy layer.
  • b) Physically Handicapped certificate in prescribed Performa issued by the Competent Authority for physically handicapped persons eligible for appointment to the posts on the basis of prescribed standards of Medical Fitness. The Competent Authority to issue Physically Handicapped Certificate shall be Medical Board duly constituted by the Central or State Government.
  • c) Discharge Certificate issued by the competent authorities for candidates claiming ExServiceman category.
  • d) NAC/NTC certificate of Ex Trade Apprentices clearly specifying name of Ordnance Factory concerned. (Please note that Ex Trade Apprentices mean candidates who have completed apprenticeship training from Ordnance Factories)

Application Fees

APPLICATION FEES: Candidates are required to pay a fee of Rs.50/- as application fees. While filling the online application, the candidate will be directed to the payment gateway to remit the application fees.

  •  After entering the relevant details, the candidates may remit the money through credit card, debit card or net banking through the payment gateway provided in the website.
  •  CHALLAN MODE: Candidates may pay by cash in any branch of SBI through the SBI challan which can be generated and downloaded from the website. Applicants who pay by cash (Challan Mode) should take a printout of the system generated challan slip during PART-II of the registration and deposit the fee at an SBI branch counter before the closing date of application. After the candidate remits the cash at SBI branch, she/he has to enter the transaction reference number by logging into ‘APPLICANT LOGIN’ and upload the stamped challan displaying the transaction number. Please note that the option to upload the challan details will be available only 2 hours after downloading of the challan. Only after this process is completed, registration process of such candidates who opt to pay by Challan Mode will be considered successfully completed.
  • Applicants who are unable to pay the amount on the closing date even with valid challan slip will have the option for online payment mode also which will be open until 23:55 hours of 19th June 2017. Applicants’ names whose payment details have not been received from the bank (for payment through Challan Mode) will be displayed on the website within two weeks after the last day of submission of online application as fictitious payment cases. All such applications without the fees will be out rightly rejected.
  •  Fee once paid will not be refunded under any circumstances. The paid fees shall also not be carried forward for any other examination or selection.

EXEMPTION FROM PAYMENT OF FEE: SC/ST/Ex-Servicemen (eligible for reservation#) / Physically Handicapped /Women/Ex-Trade Apprentice of Ordnance Factories only are exempted from payment of fee.

(#-Ex-servicemen who have already secured employment in civil side under Central Government in Group ‘C’ posts on regular basis after availing of the benefits of reservation given to Ex-servicemen for their re-employment are NOT eligible for fee concession. However, she/he can avail of the benefit of reservation as Ex-serviceman for subsequent employment if she/he immediately, after joining civil employment, gives self-declaration/undertaking to the concerned employer about the date wise details of application for various vacancies for which she/he had applied for before joining the initial civil employment as mentioned in the OM NO. 36034/1/2014-Estt (Res) dated 14.08.2014 issuedby DOP&T.)

OFB Group C Recruitment 2017 GENERAL INFORMATION

Applicants are advised to note the following instructions carefully:

  • I. The candidates are required to carefully go through the advertisement in detail.
  • II. The candidate must check her/his eligibility before applying for a trade/post/factory and take an informed decision.
  • III. Candidates will have to apply ONLINE only.
  • IV. It is to be noted that mere submissions of application form, receipt of ‘acknowledgement’, receipt of admit card and appearance in written examination/practical test (trade test) does not guarantee eligibility/candidature in any of the Ordnance Factories. The selection of candidates will be made based on factory-wise merit position considering available vacancies category-wise, scrutiny of original copy of credentials and eligibility, clear police verification report & medical test etc. The decision of the competent authority shall be final in this regard.
  • V. Candidates are NOT required to send hard copy of application forms to the respective applied Factory/OFRC/OFB. However, the same shall be printed and retained by the candidates only to be produced by the candidates later, at the time of document verification/trade test.
  • VI. Candidates are required to check the website regularly for any updates and changes.
  • VII. Candidates are required to give a valid mobile Number and e-mail id for periodical notices. Error in these details will result in non-delivery of important communication with respect to the examination. Candidates are advised to retain the same Mobile Number and email ID in their own interest, till all the processes of the said recruitment drive are completed.
  • VIII. Written examination is ‘Multiple Choice Question type (MCQ)’ and OMR based. There will be NO NEGATIVE MARKING for wrong answer.
  • IX. Canvassing of any kind will disqualify the candidate. Candidates are advised not to fall prey to any unscrupulous elements.
  • X. Candidates will be permitted to enter examination hall with valid ADMIT CARD and original PHOTO ID CARD only. The acceptable Photo IDs are as given:Passport, Voter photo identity card, Driving Licence issued by RTO, PAN Card , Photo Identity card having serial number issued by Central/State Government, Unique Identification Card “Aadhaar”, Photo identity cards having serial number issued by public sector Undertakings of State/Central Government, District Administrations, Municipal bodies and Panchayat Administrations. Hence the candidates are also advised to ensure that their clear PHOTO, SIGNATURE & Left Thumb Impression have been uploaded and are also printed on the Application Form.
  • XI. The candidate must not attempt impersonation or take help from any impersonator at any stage of the selection process or try to copy from neighboring candidates, books and use any electronic gadgets or any other unfair means. This shall lead to cancellation of candidature, debarment in appearing future exams conducted by OFRC/OFB without prejudice to criminal prosecution.
  • XII. The candidates will be thoroughly frisked at the time of entry to the examination centre. Candidates are advised not to bring any valuable/costly items to the Examination Halls. OFRC/OFB will not be responsible for safe keeping of any items belonging to them and the candidates shall be solely responsible for their belongings. No electronic gadgets shall be allowed inside the examination centre.
  • XIII. The biometric attendance and record shall be taken in the examination hall. The candidates are advised to ensure that they do not apply mehendi/tattoos on their fingers, which may lead to non-capture of biometric attendance. The candidature of the candidates shall be cancelled in the absence of non-capture of biometric data.
  • XIV. The candidate may note that OFRC/OFB may record the entire examination process through Videography/CCTV at all the venues.
  • XV. Any material suppression of facts or submitting forged certificates/documents shall lead to rejection of candidature at any stage of selection of this process.
  • XVI. Decision of the competent authority in all matters relating to the eligibility, acceptance/rejection of any application, allotment of language, examination centre, etc will be final and binding on the candidate and no inquiry/correspondence shall be entertained in this regard.
  • XVII. Any subsequent changes in the terms and conditions of the recruitment of Industrial Employees (Semi-Skilled) & Labour Group ‘C’ against this advertisement, as per the extant rules will stand good. OFB/OFRC reserves the right to incorporate any subsequent changes/modifications/additions in the terms & conditions under this advertisement notice as necessitated and applicable. Any corrigendum will be published only on the OFB site (www.ofb.gov.in) or the site meant for applying ONLINE.
  • XVIII. Any dispute with regard to the recruitment of Industrial Employees (Semi-Skilled) & Labour against this advertisement, will be subject to courts/tribunals having jurisdiction over the City/Town in which the concerned Ordnance Factory is situated against which the candidate has submitted her/his application.
  • XIX. The candidates applying for the examination should ensure that they fulfil all the eligibility criteria for admission to the examination. Their admission at all the stages of examination will be purely provisional, subject to their satisfying the prescribed eligibility conditions. If, on verification of documents / certificates, at any time before or after the written examination, it is found that the candidate does not fulfil any of the eligibility conditions, his/her candidature for the examination shall be cancelled by OFB or concerned Ordnance Factories/units at any stage of recruitment.
  • XX. After the written examination is over, the question paper and provisional answer keys will be uploaded on the website within 3 days. If any candidate wants to contest the uploaded provisional answer keys, the candidate can do so within 07 days along with supporting documents ONLY after paying the prescribed fees of Rs 100/- for each question contested ONLINE. After the stipulated period is over, no contest shall be entertained.
  • XXI. A third party expert panel will be constituted to examine the contests received and to finalise the revised/final answer key for evaluation. The decision of third party expert panel and the result based on the same will be final and binding.
  • XXII. Record retention period for examination material (Original OMR Sheet/Attendance Sheet/Question paper or any other records / documents etc.) will be 3 month after the declaration of result of written exam. After that, no RTI shall be entertained by OFRC/any unit of Ordnance factories regarding this examination.
  • XXIII. The Competent Authority reserves the right to adopt any alternative lawful mode of selection in part or in whole, in case of contingency.
  • XXIV. The applicants are required to take a print-out of Admit Card to appear in the exam from the ONLINE portal. The candidates are NOT required to send any hard copy, anywhere, including that of his application filled up online, any documents or Admit Card.
  • XXV. Admit Cards can be downloaded from the online portal/website. The candidates are advised to regularly check OFB website, www.ofb.gov.in, and the online portal/website for regular updates regarding download of admit card, exam dates etc. The applicants are required to ensure that the following details appear on the Admit Card print-out while downloading the Admit Card from the online portal: A. Name and Roll No. B. Clear photo for Identification purpose C. Clear and legible signature D. Clear Left Thumb Impression E. Complete address of the Centre/Venue However, the Admit Card shall be retained by the candidates only and produced at the time of written examination and subsequently, at the time of document verification/trade test. The candidate shall ensure that the Admit Card shall be duly signed by the invigilator during the written examination.
  • XXVI. Request for change/correction in any particular in the application form shall not be entertained under any circumstances. The OFRC/OFB will not be responsible for any consequence arising out of non-acceptance of any correction/addition/deletion in any particular filled in the application form, whatever the reason may be.
  • XXVII. If sufficient candidates are not available in the required PWD category within the same trade, then there will be lateral exchange of vacancies in any one of the above mentioned PWD category, subject to post being identified for the disability.
  • XXVIII. The vacancies intimated in this advertisement are tentative in nature and OFRC/OFB reserves the right to increase/decrease the number of vacancies or cancel the recruitment process, in total.
  • XXIX. The candidates may please take note that they are liable to be posted/adjusted in any Ordnance Factory situated across India, other than the one they have applied to.

OFB Group C Exam 2017 Online Practice Test:

  • OFB Group C Exam Questions Answers. This mock test having question each, with four choices. On each click on answers system will tell you where the answers is correct or incorrect. There many online practice set of Sarkari Naukri Exam Question answers quiz.

Subjects Question Answers

0 Users (0 votes)
Helpful
What people say... Any help? Leave your Question (We will reply you with in 3 Days)
Sort by:

Be the first to leave a review.

Verified
{{{review.rating_comment | nl2br}}}

Show more
{{ pageNumber+1 }}
Any help? Leave your Question (We will reply you with in 3 Days)

Your browser does not support images upload. Please choose a modern one